Skip to main content

Medium Resolution

PlanetScope Monitoring provides a medium-resolution, continuous, and complete view of the world from above.

  • 98 Topics
  • 271 Replies
98 Topics
jjennewein
jjennewein‎‎ 🌱
asked in Medium Resolution
Intermittent striping observed in Super Dove imagery

Hello, I’ve been working with Dove and Super Dove time series to explore in-season variable rate nitrogen adjustments with private sector stakeholders, where NDVI and other indices are key metrics to characterize in-field variability. In some of the scenes (such as the one shared above) I’ve noticed a visual striping pattern, and I am wondering if there is a way to adjust for this, or to know which satellites may be prone to this to avoid them in our analyses. We will eventually be using imagery over large areas and won’t be able to evaluate each scene visually, so an automated way to 1) adjust for the striping, or 2) know which scenes have them to remove from our time series would be quite valuable. Thank you!- Jyoti Jennewein, USDA-ARS

633
jjennewein
duranh19
duranh19‎‎ 🌱
posted in Medium Resolution
NDVI discrepancy across AWS, GEE, and Sentinel Hub – Same Sentinel-2 Scene

Hi everyone,I'm conducting a crop monitoring project in southeastern Turkey and comparing NDVI values across three platforms (AWS, GEE, and Sentinel Hub) using the exact same Sentinel-2 tiles and date.During this process, I observed consistent NDVI differences across platforms, even when using the same data product level (e.g., L1C).  Scene MetadataDate: 24 August 2024 Tiles: 37SDA, 37SDB, 37SEA, 37SEB AOI: Same polygon used on all platforms Bands: B04 (Red) & B08 (NIR), scaled to [0–1] as needed NDVI Comparison (Tile 37SDA Example) Platform Product NDVI Mean NDVI Min NDVI Max AWS L1C 0.5206 0.4238 0.5582 GEE L1C 0.52198 0.4475 0.5582 GEE L2A 0.6085 0.5173 0.6458 Sentinel Hub L1C (EO Browser) 0.74 0.56 0.80 Sentinel Hub L2A (EO Browser) 0.85 0.61 0.93  

1123
williamray
Planeteer 🌎
I
imaging‎‎ 🌱
asked in Medium Resolution
No NDVI Data

Hello, https://services.sentinel-hub.com/ogc/fis/xxxxx-19dd-xxx-xxxx-xxxxxxxx?BINS=20&layer=VEGETATION-INDEX-VALUE&RESOLUTION=10m&crs=EPSG:4326&STYLE=INDEX&MAXCC=1&time=2025-06-18/2025-07-06&geometry=POLYGON%28%28-25.4148+31.66437%2C-25.40882+31.67282%2C-25.40641+31.67593%2C-25.40514+31.67734%2C-25.40399+31.67823%2C-25.40248+31.67938%2C-25.4009+31.67985%2C-25.39879+31.68096%2C-25.39597+31.68296%2C-25.39478+31.68443%2C-25.39264+31.68856%2C-25.39153+31.69054%2C-25.39058+31.69259%2C-25.38962+31.69486%2C-25.38833+31.6969%2C-25.38706+31.69934%2C-25.38594+31.70293%2C-25.38365+31.70592%2C-25.37988+31.71129%2C-25.37934+31.7153%2C-25.37925+31.72036%2C-25.37934+31.72297%2C-25.37957+31.72639%2C-25.37948+31.72988%2C-25.37883+31.73381%2C-25.3782+31.73569%2C-25.37846+31.73886%2C-25.3789+31.73999%2C-25.37909+31.74021%2C-25.38139+31.742%2C-25.38423+31.74526%2C-25.38933+31.74358%2C-25.39061+31.74593%2C-25.39183+31.74541%2C-25.39277+31.74656%2C-25.39488+31.74689%2C-25.39736+3

1513
williamray
Planeteer 🌎
lucialayr
lucialayr‎‎ 🌱
asked in Medium Resolution
Comparing NDVI across PlanetScope images

Hi everyone, I recently worked with Planet data for the first time. I downloaded two PlanetScope images from the Planetary Explorer (RGB-IR reflectance and I also chose the option to harmonize images with Sentinel-2)I then calculated NDVI for both images and then the average. I am very surprised by the averages I find. In the center of the image a fire happened in between the two dates so I would expect NDVI to decrease (makes sense). However, I am suspicions of the increases in NDVI I see in other areas, that seem to be the same order of magnitude. While this could be an artifact of NDVI just being quite low in general, I was still wondering if there is an issue with comparing data across difference images taken by different satellites?Here is the code I used to process the data (in R):library(tidyverse)library(sf)library(terra)library(tidyterra)NDVI = function(raster) { ndvi_r = (raster[[4]] - raster[[3]]) / (raster[[4]] + raster[[3]]) return(ndvi_r)}raster_prefire = terra::rast('202

1333
matt.ballard
Planeteer 🌎
M
Planeteer 🌎
mariah.hauckPlaneteer 🌎
posted in Medium Resolution
Resources and Q&A - Agile EO Webinar: Analysis-Ready PlanetScope Reaches General Availability

In November’s Agile EO episode, we introduced Analysis-Ready PlanetScope (ARPS)—a new offering that accelerates your analytical workflows with pre-processed, harmonized satellite imagery. Watch the webinar on-demand.  Below are some questions we received during the event and resources to learn more. Questions Question: Is there a technical product sheet for today's products?Answer: The Analysis-Ready PlanetScope Technical Specification is available here. Question: How do you reduce the clouds or select the images with minimal clouds?Answer: Analysis-Ready PlanetScope does not remove clouds. It composites the best available PlanetScope pixel taken over an AOI based on the amount of cloud cover and quality. The cloud mask is produced by creating a cloud-free reference image using a year’s archive of PlanetScope, Sentinel-2, and Landsat.  Question: Can Analysis-Ready PlanetScope data be accessed in Planet Explorer?Answer: No, currently, there is no support for viewing Analysis-Ready Plane

5214
elyhienrich
Community Manager 🌎
belen
belen‎‎ 🌱
asked in Medium Resolution
Same footprint?

Hello, I wanted to know if Planetscope images have the same footprint. For a defined AOI, is the pixel position maintained for images from different dates?

2301
elyhienrich
Community Manager 🌎
Meridia
Meridia‎‎ 🌱
asked in Medium Resolution
GEE app failed to load planet-nicfi basemap

Hi community,We are facing the same challenges as reported here: We see that the solution 9 months ago was solved with support team. Wondering if specific tickets are still needed as we are facing exactly the same challenge.Best,Vivian Ribeiro (Meridia's team)

1471
elyhienrich
Community Manager 🌎
Richard
Richard‎‎ 🌱
posted in Medium Resolution
Help for my cute cat!

Dear Planet Company,Hello, I am a fan from China. Recently, a cycling blogger I follow went through a very terrible setback. During his cycling journey, his beloved cat was poisoned and discarded. Since the area was extremely desolate and there were no available surveillance footage, I was wondering if Planet Company could check satellite images or real-time footage within a 5km radius of the following coordinates for the time frame below?Coordinates: 39°11'54" N, 88°55'36" ETime: April 15, 2025, from 16:00 to 19:00 (GMT+8)Thank you for your consideration.

1442
Richard
AAPV
AAPV‎‎ 🌱
asked in Medium Resolution
Slight spatial misalignment in PlanetScope/RapidEye imagery

Hello!I have a set of scenes of the same area, but there’s some slight misalignment between them (like 3 or 4 pixels), this usually isnt a problem, but I need the most precission possible for my use case (measuring coastal recession), so even a small misalaignment could change results greatly. This happens between images from different and same sensors, so it isnt a result of using different sensors (at least i dont think so),beacuse i have some that are correctly aligned. Also, i used the same AIO to download the images from PlanetScope, so the images have the same extent and are clipped to the same area.  My question is, is there any way to download scenes that are correctly aligned, or should I fix it manually? (or is there a faster way to automatically align them?)  Thanks everyone!

2242
AAPV
J
japolo‎‎ 🌱
asked in Medium Resolution
Rendering PlanetScope scene in QGIS appears incorrect

I downloaded 8-band analytics ready surface reflectance PlanetScope scenes for a study. I want to create a visualization of one of the scenes with QGIS. However, when I load the scene in QGIS as a raster, it doesn’t look like the agricultural field I’m expecting. I made sure to assign the bands as red = 6, blue = 2, and green = 4.This is how the scene looks in Planet Explorerscreenshot of planet explorer showing a selected image in an AOIThis is how the PlanetScope scene looks rendered in QGISQGIS with the PlanetScope scene in the drawing area The scene looks like an odd mosaic of colors. I realize that the resolution of the underlying NAIP image might influence how the scene might be perceived, but honestly, the scene looks like an odd mosaic of colors. How can I get the scene to render in QGIS the way it looks in Explorer?

1761
elyhienrich
Community Manager 🌎
harper269
harper269‎‎ 🌱
asked in Medium Resolution
Best Practices for Visualizing Clear Pixels from UDM2 in ArcGIS Pro?

Hi all,I’m working with PlanetScope SuperDove UDM2.1 data in ArcGIS Pro and I’m trying to better understand how to interpret and visualize clear pixels in the UDM RGB composite.As I understand it, the default RGB band mapping is: Red = Clear Green = Snow Blue = Shadow To work around this, we’re also testing the individual UDM bands using Extract Bands and the Raster Calculator, creating binary layers like:Con("UDM2_B1" == 1, 1, 0) (assuming Band 1 = Clear), so that: 1 = clear pixel 0 = not clear This is giving us a more direct view of which pixels are flagged as usable. Are we on the right track with that approach?I'd love to hear how others: Visualize or validate clear pixels in RGB composites Work with UDM2 bands in ArcGIS Pro or QGIS Apply symbology or classification to quickly identify good pixels for analysis We’re using this for water quality and algal bloom detection, so identifying usable pixels accurately is important for our downstream work.Any advice, workflows, or

1911
O
Planeteer 🌎
H
Haiyan Huang‎‎ 🌱
asked in Medium Resolution
black lines in SR file

Hi,I found some black lines (low values ) in the NIR band of  20200224_152346_83_106b_3B_AnalyticMS_SR. Those lines do not appear in RGB bands, so I think they are not natural features.I m not sure how many files have the similar issue. Would you please check as NIR band is very important to our research. best,Haiyan

5112
elyhienrich
Community Manager 🌎
J
Javier Muro‎‎ 🌱
asked in Medium Resolution
Spatial shift in udm

Hi. I’ve noticed that in some images (3/3 so far), the udm layer has some shifts across scenes for one same tile/overpass. This complicates the application of cloud masks. Is is something you are aware of? or is it rare and I was just unlucky? 5626519_3264221_2022-05-09_241c_udm25625958_3263610_2022-05-08_241c_udm25626519_3264220_2022-05-09_241c_udm2 

4012
elyhienrich
Community Manager 🌎
L
Léo Rasse‎‎ 🌱
asked in Medium Resolution
Non consistent surface reflectance values

Hello everyone,  I am using PlanetScope Scene images already corrected in surface reflectance (Dove Classic) to assess the temporal changes of the vegetation cover on a specific site. As the site is about 30 km long, I need to use several tiles to cover the whole area.  I have recently noticed that the reflectance values of the pixels of two overlapping images are quite different (even if the images were taken by the same satelitte, at the same time).Do somebody know why do I oberve this ? If yes, do somebody know how can I solve and obtain consistant surface reflectance values between overlapping tiles ? I thank you in advance for your answers, Léo

4847
elyhienrich
Community Manager 🌎
E
Evangelia Efi Konstantinidou‎‎ 🌱
asked in Medium Resolution
Issue with PlanetScope product type 'Harmonized'

Hi, I’m having issues with the ‘harmonized’ PlanetScope data products.I have been downloading several such scenes and after saving the extracted data folders on disk, the products seem not be the harmonized versions of the scenes. I posted a related question  in the forum some months ago but I realize that, from my part I correctly choose the data product to be ‘harmonized’ (please see attachment temp_screenshot.jpg) while ordering. Nowhere in the downloaded files (.tif extension, manifest json file) is there an indication of the product being harmonized, it looks like an ordinary surface reflectance composite scene.For reasons I don’t understand, on the only 2 instances where I received properly annotated ‘harmonized’ products, the extracted folder had a different structure (attachment temp_screenshot_2.jpg). Usually each downloaded product gets extracted in a single folder that contains the ‘manifest’ and ‘catalog’ files.I would really appreciate some assistance/ clarifications here.

2613
E
herolobster
herolobster‎‎ 🌱
asked in Medium Resolution
how to purchase imagery with low revisit rate but wide range (probably global)

I am working on a geopolitical science project on a weekly basis, how to get the PlanetScope global image within 30 days but with a low revisit rate? I've noticed the MONITORING PLAN, but a high revisit rate doesn't fit my needs. Thank you!

4084
elyhienrich
Community Manager 🌎
H
Haiyan Huang‎‎ 🌱
asked in Medium Resolution
8b SR images have black strips

Hi,I’ve downloaded some 8b sr images, but I found they have some black strips across the image. (see below, band 4 of 20230214_080952_42_2447_3B_AnalyticMS_SR_8bmore obviously in shortwave bands. would you please check?Best,Haiyan 

4402
elyhienrich
Community Manager 🌎
zekariab
zekariab‎‎ 🌱
asked in Medium Resolution
Failed to load planet-nicifi basemaps on GEE

I am getting the following error, when I try to load the basemap asset on GEE.ImageCollection.load: ImageCollection asset 'projects/planet-nicfi/assets/basemaps/africa' not found (does not exist or caller does not have access).

2851
elyhienrich
Community Manager 🌎
M
Planeteer 🌎
mariah.hauckPlaneteer 🌎
posted in Medium Resolution
Resources and Q&A - Agile EO: Aircraft Detection at Planetary Scale

In March’s Agile EO episode, we introduced Aircraft Detection—a new offering that provides near-daily monitoring of thousands of airfields globally, enabling trends and anomalies to be spotted. Watch the webinar on-demand.  Below are common questions, and questions that we weren’t able to get to during the live event. Our hosts Justin Davis, Sr. Product Manager - Applied Machine Learning, and Adam Van Etten, Principal Data Scientist, have provided answers, plus resources to learn more. QuestionsQuestion: Can you track aircraft in flight? Answer: We can’t say for sure that a given aircraft is the same aircraft from one day to the next, BUT we can track how many aircraft are present at a given airfield each day AND whether the aircraft present are in the same positions as they were before. This can help indicate activity at a given airport/airfield and highlight anomalous behavior. Question: How big of an airplane can you detect?Answer: In our experimentation, we found performance for ai

1640
M
Planeteer 🌎
S.shagun
S.shagun‎‎ 🌱
asked in Medium Resolution
Scaling and indices for bands for planet images

Hi,I am very new to remote sensing. I got raw images from planet scope for my area of interest through QGIS plugi. however before I calculate NDVI for my area. I need to normalised or scale the bands. I am using this formula lower_percentile = 30upper_percentile = 70y1=float(0.2)y2=float(0.5)def scale(band): # scale values for display purposes    band = band.astype('float64')    x1 = np.log10(float(np.percentile(band[band!=0], lower_percentile)))    x2 = np.log10(float(np.percentile(band[band!=0], upper_percentile)))    band[band==0]=np.nan    band = np.log10(band)    def equations(p):        a, b = p        return (np.log(a)-x1*b-np.log((1-y1)/y1), np.log(a)-x2*b-np.log((1-y2)/y2))    a,b =  fsolve(equations, (1, 1))    band=1/(1+a*np.exp(-b*band))    return band. Can somebody please tell why could be different method for scaling and is there any paper which can recommend for scaling the planet images? 

3945
J
Planeteer 🌎
jan.blazek
jan.blazek‎‎ 🌱
asked in Medium Resolution
Issue with Retrieving NDVI Data from PlanetScope

Hi,We have started testing PlanetScope, but we are unable to retrieve NDVI data for the selected area.In My Collections, we created a Collection with ID, and we added a Subscription to it. The PlanetScope data was successfully loaded—we can see and download it via the web application.However, when we try to generate NDVI using the API endpoint https://services.sentinel-hub.com/api/v1/process, we do not receive any data. The endpoint returns null.Request:{ "input":{ "bounds":{ "properties":{ "crs":"https://www.opengis.net/def/crs/OGC/1.3/CRS84" }, "bbox":[ 13.895467093481912, 49.978376989130496, 13.905815440973406, 49.982298215337835 ] }, "data":[ { "type":"byoc-<collectionId>", "dataFilter":{ "timeRange":{ "from":"2025-03-09T00:00:00+01:00", "to":"2025-03-09T23:59:59+01:00" }

2301
jan.blazek
kristofj
kristofj‎‎ 🌱
posted in Medium Resolution
Preparing Imagery for Time-Series Analysis

I am attempting to prepare PlanetScope imagery for a time-series analysis. I have read a bit about transforming imagery into Analysis-Ready Data (ARD), so I am aware of the general steps in the process. This is the high-level workflow I have come up with so far:masking --> normalization --> compositing --> co-registration However, I am not sure how to implement these steps. Does anyone have any resources that describe how to prepare imagery for time-series analysis in as much detail as possible? Some other details:I am using 8-band imagery from SuperDove sensors I have downloaded imagery as analytic surface reflectance at this point (but am open to other formats) I am using Python to acquire and process this imagery.Thanks for any help you can provide.

2614
kristofj
minhnguyen
minhnguyen‎‎ 🌱
asked in Medium Resolution
Unexpected response status: 422 in timelapse

I want to create a timelapse using PS imagery but I have this error Unexpected response status: 422. Why is the error? I use more than 100 images.

3292
elyhienrich
Community Manager 🌎
Dinh Hung
Dinh Hung‎‎ 🌱
asked in Medium Resolution
Xin gia hạn tài khoản

Xin chào,Hiện tại tôi đang sử dụng hình ảnh PlanetScope để phân tích dữ liệu thông tin biến động rừng của mình. Tuy nhiên, tôi nhận thấy Tài khoản Giáo dục và Nghiên cứu của mình đã hết hạn. Tôi có thể yêu cầu gia hạn cho tài khoản của mình không? Ngoài ra, hiện tại tôi cần lượng dữ liệu lớn hơn. Tôi có thể tăng giới hạn tải xuống hàng tháng cho tài khoản của mình không?Cảm ơn bạn rất nhiều vì sự giúp đỡ của bạn. Tôi mong nhận được phản hồi của bạn.

3312
elyhienrich
Community Manager 🌎
Varaha_RS
Varaha_RS‎‎ 🌱
asked in Medium Resolution
RGB reflectance ranges for proper RGB layer display on QGIS

I am having trouble in getting a clear display of a true color composite (TCI) of a harvested farm in north of India in QGIS. I am using Planetscope image of 2024 from the 8-band Superdove collection. This is a 2.5 acre farm. The TCI content is getting obscured by rainbow effect (‘Unclear.png’). The band ranges and other symbology details are given in ‘Unclear_specs.png’). I have attached a screenshot of the metadata of this farm for reference (‘Unclear_metadata.png’). What band value ranges or other parameters should I edit to see a clearer image?FYR, I have attached screenshots in the three categories for a larger farm (14 acres) that is harvested in one plot and tilled in other plots: Clear_14ac.png, Clear_14ac_specs.png, Clear_14ac_metadata.png. This farm has a very clear view. The clear confidence percent for this image is 95 as compared to the unclear farm (85) but that should not produce such a drastic difference in clarity given the clear percent in both images is 100.Please he

4022
elyhienrich
Community Manager 🌎
Terms & Conditions
Planet Monitoring
Planet Tasking
Single Order Tasking
Planet Analytic Feeds
Planetary Variables
Planet Basemaps
Planet Insights Platform
Pricing
Broad Area Management
Agriculture
Science Program
Energy & Infrastructure
Forestry & Land Use
Insurance
Mapping
Sustainability
Maritime
Civil Government
US State and Local
Europe
Planet Federal
Defense & Intelligence
Armed Services
Investors
Connect with Planet Partners
Become a Partner
Planet Esri Partnership
Find a Partner
About Us
Customer Stories
Our Team
Careers
Press
Resources
Impact at Planet
Contact Us
Art at Planet
FAQs
Legal Entities
Planet University
Documentation
Help Center
Publications Database
Contact Sales
Explorer Log In
Partner Portal
Investors
Blog
Gallery
Disaster Data
Publications
Planet Insights
Planet Stories

© 2025 Planet Labs PBC. All rights reserved.
| Privacy Policy | California Privacy Notice | California Do Not Sell
Your Privacy Choices | Cookie Notice | Terms of Use