Skip to main content

Planet Products

This is the space for Planet products, please find the relevant product below.

2784 Topics
S
SentinelHub User
posted in Sentinel Hub
Quota Reset Date

Hi, I have a question about quota reset date. For an annual subscription, if the monthly quota is exceeded, does it reset at the beginning of next month or is it calculated for the sum of last 30 days or any other method? Cheers…

132
S
S
SentinelHub User
posted in Sentinel Hub
How to have a NDVI anomaly image

Hi everyone, What I would like to do is generating an image representing the NDVI anomaly of an area. By NDVI anomaly, I mean the current NDVI compared to the average NDVI for the same period of the past years (of course this definition is not accurate : how many year, how do I define the same period, etc, but lets begin with the beginning). Does anyone already did something like that ? How ? Do you have hint of how to do that ? Thank you for your help,

448
S
S
SentinelHub User
posted in Sentinel Hub
Orders vs Subscriptions in Planetscope

Hi,I’ve just made the dumb error of creating an Order instead of a Subscription (and it was over an area that I already had a subscription because I wanted to increase the area covered). Now I’m unable to delete the Order because ‘Running Orders cannot be deleted’.Is there any way this data order can be converted to subscription? I think what got me is that the planetscope ‘Create order/subscription’ panel in Sentinel Hub EO Browser for Order has From and To dates just like the Subscription panel - in fact the only difference is the addition of the line ‘Query’ in the Order panel.My error but I do think it would be less likely to occur if Create Order and Create Subscription were different menu tabs in Commercial Data rather than one tab with a slider between them.Anyway, hopefully you can help me correct this error.Kind Regards 

172
S
S
SentinelHub User
posted in Sentinel Hub
Transparent GeoTIFF with true color

Hi, I’m using Sentinel API to generate GeoTIFF in true color and NDVI from a polygon. With the NDVI, the outside of the polygon is transparent, but when I try with the true color, it’s always black. Could you help me figure out what I’m doing wrong? NDVI//VERSION=3 function setup() { return { input: ["B04", "B08"], output: { bands: 1, sampleType: "FLOAT32" }, }; } function evaluatePixel(sample) { return [(sample.B08 - sample.B04) / (sample.B08 + sample.B04)]; } True color//VERSION=3 function setup() { return { input: ["B02", "B03", "B04", "SCL"], output: { bands: 3 } }; } function evaluatePixel(sample) { return [2.5*sample.B04, 2.5*sample.B03, 2.5*sample.B02]; } Thank you

189
S
S
SentinelHub User
posted in Sentinel Hub
Inactive subscription

I subscribed today to an exploration plan and it still keeps asking me to upgrade and the subscription is not yet active. Kindy assist.

131
S
S
SentinelHub User
posted in Sentinel Hub
Area of interest

How can I load and display several areas of interest? How can I change colour and ligne size (thickness)? Is there a script to do this? Thanks Juerg

142
S
S
SentinelHub User
posted in Sentinel Hub
Why is B03 provided as multiple band raster and not as signle grey?

While downloading B03 why WcsRequest I get 3band raster. I truly dont understand why. 

151
S
S
SentinelHub User
posted in Sentinel Hub
Pleiades Data Error

Hello! I’ve been expereincing Pleiades data issue since last couple of weeks. Everytime i receive following error Error confirming order Request failed with status code 500 DATA_PROVIDER_ERROR Error occurred while accessing data provider: [403 Forbidden]. Please contact support. {“providerError”:{“status”:403}} Can you please help to resolve the issue?

175
S
S
SentinelHub User
posted in Sentinel Hub
Maximum size of Image

Good evening, I want to ask if it is posible to know how can I have a maximum of size (default size is 256 x 256). I want to know how can I get maximum please. (size=[512, 512]) Thanks

247
S
S
SentinelHub User
posted in Sentinel Hub
Data Fusion S2 S1 error

I’m trying to create a data fusion among S2 and S1 to eliminate the clouds using the script that I have ever used but now There is ever this error message: One or more of these parameters (polarization, acquisitionMode, resolution) are not set and can’t be fetched from service because instanceId and layerId are not available. How solve this?

214
S
S
SentinelHub User
posted in Sentinel Hub
EO4SD Agriculture layer - is chat GPT lying?

Hello dear sentinel-hub team! I was searching for crop type data and I have decided to try asking chat GPT for available datasets. One of GPT suggestions was this: "Earth Observation for Sustainable Development (EO4SD) - This program provides free access to a variety of Earth observation data products, including crop type maps. The EO4SD Agriculture and Rural Development Cluster has produced a crop type map of the year 2016, which can be accessed through the ESA’s EO Browser: Sentinel Hub EO Browser " I could not find any any clue for an existence of this layer, specifically on sentinel-hub EO browser and also in the EO4SD agriculture page . My question is if this map is exist, or is it another fake- information made up by AI 😅

182
S
S
SentinelHub User
posted in Sentinel Hub
Sentinel 2 - Missing data before Jan 2017 - EO Browser

Hi, I’m now unable to download data before Jan 2017 for Sentinel 2 using the EO Browser over Southern Australia, whereas I was previously able to download back to 2015. Has something changed that means that the data before Jan 2017 is no longer available for download from EO Browser?

151
S
S
SentinelHub User
posted in Sentinel Hub
Calculating cloud coverage

Hi, I would like to ask you a couple of questions about cloud coverage: Do you calculate cloud coverage for L2A in the catalog service based on the geographic bounds (bounding box query) - or the cloud coverage percentage is pre-calculated for the scene and always constant? Do you know of any tool which is reporting for a given bounding box real cloud coverage in the scenes - based on the pixels marked as clouds only visible in the bounds of the query? Thank you.

231
S
S
SentinelHub User
posted in Sentinel Hub
AttributeError: 'Polygon' object has no attribute 'total_bounds' when trying to get bbox for seperate polygons

I’m tring to get bbox for polygon I have . The polygons are originaly in geodataframe and I change it into the sentinelhub geometry object. The problem is that when I try to get the bbox for that polygon. I get error: AttributeError: ‘Polygon’ object has no attribute ‘total_bounds’ This is how I have tried to do this: #function to get the bbox- coordinates, bbox and size: def get_bbox_from_shape(shape,resolution): minx, miny, maxx, maxy = shape.geometry.total_bounds bbox_coords_wgs84=[minx, miny, maxx, maxy] bbox = BBox(bbox=bbox_coords_wgs84, crs=CRS.WGS84) bbox_size = bbox_to_dimensions(bbox, resolution=resolution) return bbox_size,bbox,bbox_coords_wgs84 #get the bbox for each for name,shape in zip(shapes['name'],shapes['geometry']): shape=Geometry(shape,CRS.WGS84) bbox_size,bbox,bbox_coords_wgs84=get_bbox_from_shape(shape,10) and that returns the attribute error. I have used the Geoemtry in the past in order to get it as the correct object needed, s

191
S
S
SentinelHub User
posted in Sentinel Hub
Sentinel-2 images distortions, artifacts, clouds - How to remove?

Hi guys, I use sentinel hub request builder (Requests Builder (sentinel-hub.com)) batch API to get satellite imagery for the whole of Germany for 2017 and 2020. I create a cloud-free mosaic using the script below between the dates 15. May and 15. September of each year. Otherwise, my settings are tiling grid: 20km resolution: 10 output image format: TIFF COG output = true The image for 2020 (on the right) looks fine, the one for 2017 looks severely distorted (see an exemplary part of one satellite image below). I now change the timeframe to 01.03. - 01.11. for 2017, but the clouds remain and many distortions (e.g., the black spots) exist. Does anyone know what is going on here and how I can fix it? //VERSION=3 function setup() { return { input: [{ bands: ["B04", "B03", "B02", "CLM", "SCL"], //Requests required bands, s2cloudless mask and scene classification layer units: "DN" }], output: { bands: 3, sampleType: SampleType.UINT8 }, mosaic

321
S
S
SentinelHub User
posted in Sentinel Hub
How to visualize a gray-scale single band using Evalscript

Hello folks, I’ve been trying to visualize a specific band of a satellite imagery by modifying the evalscript in configuration utility. For example, I acquired just the ‘VV’ band of a SAR image. There are two templates (base products) provided there: (1) VV - linear visualization from 0 to 0.5, and (2) VV - decibel visualization from -20 dB to 0 dB. Both the methods seem to stretch the VV band quite simply. However, I could only see a black background image when I check the ‘preview’. I tried to stretch it more using VV*4 or using a higher scaler. It didn’t work. I was also thinking if this is because the preview needs a three-band 8-bit image to visualize, such as a standard PNG. But it still did not work when I tried ‘return [VV, VV, VV]’. I was expecting it give me a gray-scale visualization but the resulting preview was still a black background. My eventual goal is to request such gray-scale image as a PNG and show it in my web map based on Google Map Javascript API. I’m confused b

162
S
S
SentinelHub User
posted in Sentinel Hub
Interrupted purchase due to internet connectivity

i was in between a purchase of an image with status “running” but due to internet connectivity issues the browser got refreshed. as a result the download was not concluded and the remaining area was reduced by the initial amount which was under process. how can i revert back my area or get my download completed. regards

141
S
S
SentinelHub User
posted in Sentinel Hub
VV - decibel gamma0

Dear all I recently joined this group. I was looking at a product in ‘VV - decibel gamma0’ and it looks really nice but I do not know what type of pre-processing and filtering was applied on it. Where can I find this kind of information? Thanks in advance.

201
S
S
SentinelHub User
posted in Sentinel Hub
What does the output value of a band exactly mean?

Hi, My answer is probably very similar to the source: What does the band's value signify of Landsat-8 L1C, Sentinel-2 L1C and MODIS MCD43A4 But how do I know, if I get a band output (I use Sentinel 2 2A), that the value is high or low? Is there some kind of source that tells me if the output is high or low ? The source: https://docs.sentinel-hub.com/api/latest/data/sentinel-2-l2a/#available-bands-and-data does tell me about the details of each band, but not at which range the data could and should be and when a value should be high or low. I’m looking for ages for a good source but I can’t find one. Any advice or source is welcome.

212
S
S
SentinelHub User
posted in Sentinel Hub
Planet Image Order With RUNNING status

Hi We have attempted to make an order for Planet images but receive RUNNING status on 4 orders for the past few days. Can you help us with this? number of requests to check: 354 orderStatuses [ { status: ‘RUNNING’, id: ‘’ }, { status: ‘RUNNING’, id: ‘’ }, { status: ‘RUNNING’, id: ‘’ }, { status: ‘RUNNING’, id: ‘’ } ]

163
S
S
SentinelHub User
posted in Sentinel Hub
Different values for EVI from SentinelHUB and get_data()

Hello I struggle a lot getting different values for vegetation index when I use different means of download: manually from SentinelHUB, using custom script (return [2.5*(B08-B04)/(B08+6B04-7.5B02+1)]😉 with get_data() using configuration instance I have several uncertainities when I open outputs in QGIS: resolution from SentinelHUB seems different (6.5m) even 10m is stated in metainfo is there same smoothing applied? It seems like that. pixels seems to be shifted (or rotated in some tiles) even using same epsg4326 values differ - is there some implicit ATMCOR applied Any idea? Are there some other refinements processed when download from SentinelHUB ?

207
S
S
SentinelHub User
posted in Sentinel Hub
Can’t download sentinel 2 data

I want to download the sentinel 2 level2 data but facing the issue, sometimes facing the invalid key issue and sometimes only blank page shows Invalid key (f7761ca2-63e5-4419-9d90-2063039e0377) to access Products

141
S
S
SentinelHub User
posted in Sentinel Hub
Downloading Third party data via Process API pixel resolution error

I am trying downloading third party image provided by PlanetScope like below response = oauth.post('https://services.sentinel-hub.com/api/v1/process', headers={"Authorization" : "Bearer {}".format(token)}, json={ 'input': { "bounds": { "properties": { "crs": "http://www.opengis.net/def/crs/EPSG/0/{}".format(4326) }, "bbox": [17.99468170678354, -33.00874492411722, 18.0043495889445, -32.99965133466019] }, "data": [{ "type": "CUSTOM", "dataFilter": { "collectionId": collection_id, "timeRange": { "from": date_.strftime("%Y-%m-%dT%H:%M:%SZ"), "to": date_.strftime("%Y-%m-%d") + "T23:59:59Z" } } }] }, "output": { 'resx': 3, 'resy': 3, "responses": [

142
S
S
SentinelHub User
posted in Sentinel Hub
Subscription plan modification

How can suspend my mothly subscription?

142
S
S
SentinelHub User
posted in Sentinel Hub
Adding a legend, and help with LST mapping - EO Browser, Landsat

Hi all,I am a 5th year architecture student @ Cornell, and for my thesis I am dealing w/ UHI, inequality in thermal stress and other types of comfort in Phoenix.I want to do some thermal mapping with Landsat, and while the default script is good, it is in K, and not adapted for true surface mapping I believe. I found this script from the github by Mohor Gartner:Sentinel-Hub custom scriptsLand Surface Temperature (LST) Mapping ScriptA repository of custom scripts that can be used with Sentinel-Hub services.  I am having some trouble though, since I am very new at coding…Namely, I just want to be able to add legend data to the script so that when I download an image, there is a legend…And I want to change the color scale, when I try to change this line :let viz = ColorGradientVisualizer.createRedTemperature(minC, maxC);particularly, the “Red” portion to change the colors, I see there are these available scales here :greenWhiteBlueRedredTemperatureand more…but when I sub in for a differen

356
S
Terms & Conditions
Planet Monitoring
Planet Tasking
Planet Analytic Feeds
Planetary Variables
Planet Basemaps
Agriculture
Energy & Infrastructure
Forestry & Land Use
Finance & Insurance
Mapping
Sustainability
Maritime
Civil Government
US State and Local
Europe
Planet Federal
Armed Services
Defense & Intelligence
Investors
Connect with Planet Partners
Become a Partner
Planet Esri Partnership
Certification Program
Find a Partner
About Us
Customer Stories
Our Team
Careers
Press
Resources
ESG at Planet
Contact Us
Art at Planet
FAQs
Planet University
Developer Center
Help Center
Contact Sales
Explorer Log In
Partner Portal
Investors
Blog
Gallery
Disaster Data
Publications
Planet Insights
Planet Stories

© 2024 Planet Labs PBC. All rights reserved.
| Privacy Policy | California Privacy Notice | California Do Not Sell
Your Privacy Choices | Cookie Notice | Terms of Use