Develop

Hello. The’re a mistake in the borders layer in EO Browser. The source of the border layer is OSM.org but for some reason someone decided it will a good idea to chagne the borders of the state of Israel in the data imported into EO Browser. The specific issue is the border inside Jerusalem. According to the Israeli policy, the whole area of the city of Jerusalem is part of Israel. I get that european organizations find it hard to accept it. But EO Browser border layer is not accurate even according to that policy, whice states that only the west side of Jerusalem is part of Israel, as is puts most of the city outside Israeli boundaries. I recommend use the original borders data of OSM.org to correct this mistake.

Good day We are currently using the PlanetScope imagery and need a way of monitoring how much square Km we have available and how much has been used thus far? On the dashboard we can only find the total amount we purchased but no other information. Your assistance is appreciated. Kind Regards Rickus Swanepoel

Hello, I’m getting started accessing the Process API (S2L1C) and I need to get the minimum, maximum and average ndvi from a polygon. I’ve already getting the TIFF file with the desired colors, but I don’t know where to start to get those values in the response. I’m using CURL and PHP. Any help would be appreciated.

Hi! We are new to Sentinel Hub, at the moment trying to figure out, how to test our hypothesis. We will be grateful if someone correct our approach or point out what we understand wrong about the service. Any advice and comments are welcome) The issue is: there are several points on the earth (like 10-30), where we’d like to count specific objects twice a week or at least twice a month (the count may change in time significantly and we are interested in noticing it). The high resolution commercial data is needed for this Deciding if the service is suitable for this, we should check two things: The frequency of data update. This aspect could be checked on Sentinel Explorer subscription (via Requests Builder or EO Browser). We can see that any single source is not enough. But if we combine 2-3-4 commercial sources, the final average frequency of image update will be appropriate (like once a week) Then the next question comes up. Is data quality of this sources ok for our purposes, are

Background I want to process S1 GRD data for large areas(~700 sq.km) each for about 10 locations. So that is 7000sq. km. worth of data twice a week. I would like to preferably use Python and if possible process everything through SH platform. I have very limited experience with SAR data. I have mainly worked with optical data in the past. Data and Processing Specifications: I am using S1 IW GRD HiRes product (10m/px) data with orthorectification Once the orthorectified data is available, I am applying some form of speckle filtering on these images and then some thresholding technique for object recognition. I would like to store these pre-processed images somewhere in the cloud for later access for training data What I have tried so far: Simple CURL request through Python. Ran into issues downloading the geotiff images to work with on my local machine. I am assuming this is some syntax error on my part but this is probably not the best approach to achieve what I am doing SH python SDK

Hello ! I have an issue with SentinelHub WMS on QGIS. I configured my WMS layer and connexion is working well, I can see all images type available. But when I add it to my QGIS project, no image is displayed and in layer list under name of Sentinel WMS layer I have ‘the caption of an image obtained is corrupted’ something like that cause it’s written in French. Can you help to solve this?

Hello, I’m looking at the Airbus Pleiades quota package, and would like to know if there is any way to find out if there is satellite coverage over your AOI before purchasing? Airbus have this section on their website Ordering (intelligence-airbusds.com), the AOI I’m looking at (in NZ) hasn’t had any imagery in the last 6 months. Has anyone used that before and can confirm if the imagery results that show on the Airbus website are accurate or not? Thanks

Hi everyone! Are there any sources or codes to inquire the bands/properties of one product? For example, besides the spectral bands that have been listed in the Layer, how to inquire if there are any other quality bands (such as SCL of Sentinel 2) or properties (such as zenith angles and view angles) of this product? Thank you!

Hi, regarding “Commercial Third-Party Data” I saw that it is possible to buy very high resolution images.Are the highest resolution images available Airbus Pleiades (0.5m panchromatic)?Will images from Pleiades Neo (0.3m panchromatic) be available for purchase in the future?Thank you very much for your attention.Ciao,.

Hi, As I have seen the pricing section, I have a question: According to the Planet Sky-Sat, the minimum request should contain at least 25KM^2. Can I request multiple separate polygons that the sum of their area is 25 KM^2 or more?(If no, how could I use the sentinel hub API feature that I could request an image for only a desired location polygon in order to not downloading the whole tile image specially for Planet SkySat?(I have done this for sentinel2)–> for example you could make a request for a small polygon in this link: Requests Builder)

We have a script that processes new images from Sentinel2 L2A using the SNS topic, and it failed when we received the tile /tiles/21/L/YH/2023/9/28. I traced the failure to be caused by the missing B08.jp2 file on R20m: $ aws s3 ls --request-payer requester s3://sentinel-s2-l2a/tiles/21/L/YH/2023/9/28/0/R20m/ 2023-09-29 05:02:58 2421634 AOT.jp2 2023-09-29 05:02:59 17210521 B01.jp2 2023-09-29 05:02:58 27622134 B02.jp2 2023-09-29 05:02:58 28270089 B03.jp2 2023-09-29 05:02:58 28455085 B04.jp2 2023-09-29 05:02:59 29026069 B05.jp2 2023-09-29 05:02:59 31250516 B06.jp2 2023-09-29 05:02:58 31961826 B07.jp2 2023-09-29 05:02:59 28951828 B11.jp2 2023-09-29 05:02:58 27952977 B12.jp2 2023-09-29 05:02:58 32165408 B8A.jp2 2023-09-29 05:02:58 1754914 SCL.jp2 2023-09-29 05:02:58 33361871 TCI.jp2 2023-09-29 05:02:59 19532047 WVP.jp2 For comparison, here is the next date on this same tile, on 2023-10-03, which processed successfully on our script: $ aws

Hello All, My family is suffering from the war in the Gaza Strip, and they are now displaced, and we want to check on our area and our houses. Can I purchase high resolution satellite imagery in those areas or are there restrictions now? Pleas help us Thanks all

Hi there, I am using statistical api to get some data but I have a problem with it token, every time I have to get new token because it expires quickly which is not a good practice is there any way I can evitate this problem

Hi, I’m new to sentinel hub, but have been using sentinelsat and Copernicus for a while now. I am trying to see if I can switch to sentinel hub. The main reason is that Copernicus hub archives older products, so to get the old ones you have to request them first, wait for 24h and then try again. My use case is very simple: based on an input shapely polygon, a date range and cloud coverage, download all Sentinel Level2A products which match the criteria in SAFE format. After playing with a trial account for a bit, I have the following questions: Can I download products which are older than 12 months - which is the availability limit which Copernicus currently has? I think this should work since all data is stored in AWS already, no matter how old? Polygon-based search: Using sentinelsat, one could query SAFE “products” based on a shapely polygon. I see that with sentinel hub, you need a bbox instead, but that you can construct a bbox from a Geometry, which in turn can be constructed

I am developing a little library and probably an app to download/process Sentinel-2 data from AWS from within browsers. It seems that I can not make any Range requests to the server. I get a CORS error. Example code:let res = fetch( 'https://sentinel-s2-l1c.s3.amazonaws.com/tiles/32/U/MA/2017/4/30/0/B01.jp2', { method: 'GET', mode: 'cors', headers: { Range: 'bytes=0-100' }});Any chance that you will enable Range requests on AWS? I did a little research and as far as I understand you might need to enable “access-control-allow-headers:Range”.Thank you

Hi,I would like to use the CRS with the EPSG code 3035.However, this CRS is not suported yet in the sentinelhub library (Error in the BBox functionality).Is there a way to use my CRS instead of reprojecting back and forth? 

Hello, I am building a dataset and need to scan through archival Sentinel-2 imagery and make a note of all clear imagery over a specific location. I am searching in Svalbard, where there are often two images per day due to the S2A and S2B orbits. For instance below, for 2021-08-17 there is an image at 12:58 and at 12:08. The cloud has moved slightly, so i need to check if the location is visible in both, one or none of the collected images. When i select visualize for each image, the view does not seem to change in the browser. I have tried adding each to the “compare” tool and they are clearly showing the same image. The calendar only shows the specific day, but i’m not certain how you can tell which image is displayed if there are two images on the same day. Is there a way to check this? Or for instance to restrict the search to S2A and S2B so i can scan through them separately? Also the list of images in the Discover tab resets to the beginning each time i go between Visualise and

Hello, Options for Sentinel-1 seem to be only possible if this is additional layer. Is it possible to set these options also if Sentinel-1 is primary dataset?

Hello, I’m trying to create time series from sentinel 1 product. I have used the Sentinel Hub Feature Info Service (FIS) documentry . In the documentry is being done with sentinel 2 but I have tried to put sentinel 1. I have defined bbox and time interval but I get the error: with HTTPError:Failed to download from: long url 400 Client Error: Bad Request for url: … This is how I tried to do that: time_interval = '2019-08-01', '2020-08-01' bbox_coords_wgs84=[105.4284218,10.5659393,105.49221050,10.25053109] bbox = BBox(bbox=bbox_coords_wgs84, crs=CRS.WGS84) wcs_request = WcsRequest( data_collection=DataCollection.SENTINEL1_IW_DES, layer='BANDS-S1-IW', bbox= bbox, time=time_interval, resx='10m', resy='10m', custom_url_params={CustomUrlParam.SHOWLOGO: False}, config=config ) images = wcs_request.get_data() What am I doin wrong? My end goal- to have all the available images in list. to be able to display them and to run stats Thank you and happy holid

Greetings I would like to change the visualization of Sentinel 1 VV in dB by using another threshold (change the [-20,0] to other values). The area of interest is the ocean so the goal is to have a rich dynamic range at sea, even at the cost of having saturated values in land areas. I would also like to apply multilooks to reduce the speckle (by using spatial average with a determined pixel window of 3x3, 6x6, etc). I have the Matlab script but I am not familiar with Javascript or the functions that can be used in EO Browser. Would you be so kind to help me? Thank you

Hell all.How can I change my Santinel HUB Accaunt e-mail.thx.

Hello, I dont unterstand why the request builder shows other image sizes, then the function geo_utils.bbox_to_dimensions So for example, i have these coordinates: coord_corners = [12.787420957808262, 54.00935664138693, 12.861358080662724, 54.055644322669615] I calculate the image size with a resolution of 10m in x and y direction, like that: And i get for the image_size: 500x500. So, now i put the same coordinates in the request builder and set the resolution in x and y direction to 10 meter: And get this images sizes: I hope someone can help me! I tried it the whole day and dont get behind it…

I’m running this to try and request a time series of Sentinel-1 data for an aoi. from sentinelhub import SentinelHubRequest, SentinelHubDownloadClient, DataCollection, MimeType, DownloadRequest, CRS, BBox, SHConfig, Geometry config = SHConfig() # https://docs.sentinel-hub.com/api/latest/evalscript/v3/ # mosaicking of TILE means full time series returned without mosaicking evalscript = """ //VERSION=3 function setup() { return { input: ["VV", "localIncidenceAngle", "scatteringArea", "shadowMask"], output: [{ id:"s1_rtc_VV_area", bands: 2, sampleType: "FLOAT32"}, { id:"s1_rtc_angle_mask", bands: 2, sampleType: "UINT8"}], mosaicking: "TILE" } } function evaluatePixel(samples){ return { s1_rtc_VV_area: [10 * Math.log(samples.VV) / Math.LN10, samples.scatteringArea], s1_rtc_angle_mask: [samples.localIncidenceAngle, samples.shadowMask] } } """ bbox = BBox(bbox=[-63.335390675843286, -19.315383298843127, -61.39430647448334, -17.462644319757963], crs=

I’ve managed to successfully do a data search for Airbus/Pleiades data and get several results. However, if I try to simply order based on that successful search query (https://docs.sentinel-hub.com/api/latest/#/DATA_IMPORT_API/examples?id=order-using-query-1), I get this response: HTTPError: 400 Client Error: Bad Request for url: https://services.sentinel-hub.com/dataimport/v1/orders The query which works for search but not ordering: {‘provider’: ‘AIRBUS’, ‘bounds’: {‘geometry’: {‘type’: ‘Polygon’, ‘coordinates’: ()}}, ‘data’: [{‘constellation’: ‘PHR’, ‘dataFilter’: {‘timeRange’: {‘from’: ‘2020-03-01T00:00:00.000Z’, ‘to’: ‘2020-04-10T00:00:00.000Z’}}}]} Any assistance would be greatly appreciated!

If I want to use Planet data for regular monitoring of 3000 hectares in Thailand, which packages do I need to order? When I choose Planet Monitoring & Processing, I am informed that I cannot order packages outside of region B.